Announcement

Collapse
No announcement yet.

Exhaust question?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Exhaust question?

    i have some sort of factory jet kit and supertrapp 2" headers. I would like to know if it would be possible to fit a Ducati monster exhaust ?? just the pipe?

    #2
    Kami,
    I'm not sure that anybody here has done that.
    When you say is it possible well yes anything is possible!!!
    Unless you can use the existing mounting bracket you will have to make one to hold the can to the back of the bike and thats assuming that it fits on the headers without some hacking and or convertor type thing.
    Then you will have to tune your jetting..

    Good luck.

    Marc

    Comment


      #3
      true everything is possible. I'm not worried about mounting it. what worries me is the tuning of my jets part.
      How about these exhausts:
      http://www.flyncycle.com/acatalog/CBR_600_87-90.html
      disregard the model of the bikes. I know that the inlet is 2" , like my headers.

      Comment


        #4
        Well they look good.
        Jetting can be a fine art if your doing it yourself!
        Best bet is to look at the jetting list thing (do a search for jetting in the forum) and see if anything matches.
        My preference would be to simply take it to your loacal friendly dyno and get them to jet it.
        The good thing is that you will then know how much power your bike is making and also get the jetting matched to your system.

        Marc

        Comment

        Working...
        X