Anyone finish the centre exhaust?

[wainair]

I was looking around and noticed a few of you were toying with the idea of doing a centre line exhaust like on the Buells. It' s about the only thing I like on the Buells. The stock blasts have a neat pipe. It looked like a belly fairing. Just wondering. Any progress Pixel375?

[whiskeypigeon]

give JD a call

[jaysun0ne]

i want to do that with my twobrothers system

the TB pipes are the best for this because they run centered under the bike. but from what i understand it can easly be done with a m4 system as well.

what do you have?


i just cant wait till it cools down a bit, 100 deg. in the garage sucks!

[wainair]

I'm running a stock system right now. It's in great shape but I'm always looking at things I could improve. I rode a Blast in a course I did a few years ago and was really taken with the exhaust. The bike would vibrate your balls off, it was a 500. I've never known a bike to shake so much at idle! Never a loose bolt on that bike... they've all vibrated out! But the exhaust was a novel idea.

[NT696]

Mines done. Hord has one, same with bill-ns. Others around as well.
Check out 'my tinker-toy' in the members rides section for a pic of mine.

[Rich G]

Mines done. Hord has one, same with bill-ns. Others around as well.
Check out 'my tinker-toy' in the members rides section for a pic of mine.

What pipe did you use as a base for your set up?

[thepathlesstaken]

I am interested in what header(s) (and what modifications to them) that you used.

[Rich G]

I am interested in what header(s) (and what modifications to them) that you used.

My question exactly...

[jregezeino]

could this setup be done with stock header pipes.. cut and welded of course but how ghetto rigged would this look?

[jaysun0ne]

not sure
the challenge is the fact that the stock headers run off to the right side of the bike a little bit. so mounting a short can offset is probably going to drag on the right hand turns.

[NT696]

What pipe did you use as a base for your set up?

As Jaysunone noted it works bst with TBR headers. (thats what i'm running) I went to the local bike wrecker and got a re-packable oval can. The one I used was a Vance & Hines SSR. About 4" was cut off of the front, a steel 2-hole front plate, a baffle to keep some backpressure, and an extended and angled exit pipe in stainless to keep the heat away from the tire. I also filed off the centerstand lugs on the frame. If I ever take it apart I will take some pictures.