My Hawk gets subjected to the elements daily, I commute in all weather and it sits in the sun all day. Needless to say its a little grungy. I have simple green and that seems to work well for road grime but I have an aluminum M4 pipe and it needs a little shine. I know there's lots of you out there with polishing experience so what's a good product/method to start with to clean up a dirty can?
-
-
take your self to the local auto parts store that has mothers metal polish with the foam ball
its about $20 alittle on the high side but worth it.
put that polishing ball on a drill add some polish and go to town.
foose has the power ball also never used it but im sure it works with the right polish.1988 & 1991 hawkgt, 2005 rc51 -
Any particular method that works best? i.e. little circles, sweeping motion?Comment
-
doesnt really matter with that stuff just turn the drill on high and the longer you do it the better the results1988 & 1991 hawkgt, 2005 rc51Comment
-
I have had good experience with the Eagle One metal shining product. It comes in a silver can and the actual material is a wadded cloth, you just rip off the a piece of the cloth and shine away. Works real well.Comment
-
ya i used never dull same thing but it takes alot of work because your rubbing by hand.
nice to use just to maintain a nice finish but i wouldnt recommend it for bring a part back from the dead.1988 & 1991 hawkgt, 2005 rc51Comment
Comment