900RR shock reserviour clamp

[jaybird]

I see that some of you, with the 900rr shock mod, have a nifty little clamp to hold the shock reserviour. I was wondering where you all got those or how you made them I.e. from what did you make them?

Thanks,
Jason

[thepathlesstaken]

I've seen stainless steel zip ties and regular plastic zip ties used.

[SkinnE]

I had got mine from 'Billet' Bill Odom on the list. He's a whiz with a mill, but I don't know if he's still active.

E

[NT696]

I used a part for a Honda dirt bike.
Its rubber, about 1/2" thick, and has a round cutout for the res, and a smaller cutout on top. I put the small cutout against the subframe and zip-tied it on.

[jaysun0ne]

i just used zipties


but i know what your talking about

now i could be wrong here but you might want to check with hyperform i think they made them.

[MrDude_1]

i do it the OEM way...... with hoseclamps!

[icycle]

I used the hoseclamps but I made a bracket that I attached to the bolt above the top shock mount. The bracket I made was just some metal I cut up that kinda looks like the letter L . I drilled a hole where the bottom tip of the L would be and mounted the shock res. with the hoseclamps to the long part of it to keep the res. from hitting the frame. It kinda floats a little off the frame now.