Announcement

Collapse
No announcement yet.

Fairing mounts!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fairing mounts!

    I have just got myself my very own 650 bros im looking to fit a full fairing and just wondered if any of you kind folks could post some pics of the way you have mounted your full fairings and what bike was the donor?


    cheers
    Robs

    #2
    Fairing

    I bought mine used with the fairing already mounted but here are some links.
    http://www.airtech-streamlining.com/...C301989-90.htm
    http://www.airtech-streamlining.com/hondaz/nt650.htm
    Any thing worth doing is worth overdoing.
    I'm not riding too fast, I'm flying too low...

    Comment


      #3
      Tyga makes sweet stuff. nc35 that's what jd and me are using i havent got mine yet
      1\2 Liter Duc Eater

      Comment


        #4
        ive just won some brackets for nc30s on fleabay, gonna buy myself an ards racing nc30 one to go on it, just have to gets some frame mounts welded up me thinks?


        cheers
        Robs

        Comment


          #5
          Fairing mounts

          I misread your post and did not know that you already had the fairing. I think my mounts were were made by TBR but I am not sure. Here are some not so good pics of my mounts. There is also a center mount from the headlight mount which I have not shown because it does not seem to do much and has been broken since I got the bike. The side mount is rivited to the underside of the frame and gets loose so I am going to tap it and get a decent sized screw into it. The main top frame mounting was using the tank bolt which was too small so I put two 6 mm bolts into it.

          Any thing worth doing is worth overdoing.
          I'm not riding too fast, I'm flying too low...

          Comment

          Working...
          X