So, I'll admit, brakes are not my strongest subject.
What I have is a pair of rc51 nissin 4 piston calipers, braided stainless lines, and a CBR600F2 Master cylinder.
I just filled the system with motul 5.1, there is no air in the system, the pads drag a bit, and if you really squeeze the lever you can bottom it out. But the brakes are applying plenty of pressure.
My guess is Im using the wrong size master cylinder.
Any insight?
What I have is a pair of rc51 nissin 4 piston calipers, braided stainless lines, and a CBR600F2 Master cylinder.
I just filled the system with motul 5.1, there is no air in the system, the pads drag a bit, and if you really squeeze the lever you can bottom it out. But the brakes are applying plenty of pressure.
My guess is Im using the wrong size master cylinder.
Any insight?
Comment