Will this VFR wheel fit

[ARCIE31]

Now then lads
A bit of guidance is needed.
I am putting a pair of Deauville forks on my bike and wish to put on a VFR front wheel to match the back wheel.
Will the later model fit. the location of the disc bolt holes are closer to the hub on the newer 5 spoke than on the older 3 spoke.
So my question is will the brake disc on the newer wheel be large enough to mate up with the brembos...hope thats clear.
Any answers
Cheers
ARCIE 31

[JR]

Archi,
just checked the wheel disc on My Deauville and the bolt pattern does appear to match the pattern on my CBR F2 (5 spoke) wheel, however not sure the difference between an F2 and a VFR front wheel. I know the F2 and Deauville both have mechanical speedo but once again not sure about the VFR.

[robs321]

nc30/35 all have speedos driven from the gearbox, and so do the vfr750s!etc

HTH

cheers
Robs

[Dirk]

This VFR RC36 wheel fits 100% into the Deauville forks , also the breakediscs.
This wheel have a mechanical speedo.

[ARCIE31]

Cheers Guys
Time to look for an RC36 front wheel to finish off the front.
What spindle do I use the Deauville spindle or the RC36 spindle.

Once again Thanks for the guidance
ARCIE31

[Dirk]

What spindle do I use the Deauville spindle or the RC36 spindle

Never mind

Deauville- , RC36- , PC25- , PC31- , RC31-spindle . thats all the same.