Bros 400 stock carb set up?

[Jetblack]

So, just stripped the carbs down on project basket case and have found the following: Are these all stock?

Front

142 mains
35 pilot
24 fuel valve
5 hole emulsion tubes
1TH needle

Shorter diaphragm spring in front?


Rear
135 main
35 idle
24 fuel valve
1TH needle

Longer diaphragm spring in rear?
Stock setting 7mm float height
2.5 turns out

The manual only seems to have info for the 650...

[Talon]

[squirrelman]

anyone know if our usa 650 models are J or k or L ?

[Talon]

anyone know if our usa 650 models are J or k or L ?

From the same manual as the picture above.

[Bros Steve]

So, just stripped the carbs down on project basket case and have found the following: Are these all stock?

Front

142 mains
35 pilot
24 fuel valve
5 hole emulsion tubes
1TH needle

Shorter diaphragm spring in front?


Rear
135 main
35 idle
24 fuel valve
1TH needle

Longer diaphragm spring in rear?
Stock setting 7mm float height
2.5 turns out

The manual only seems to have info for the 650...

Jet sizes correct for k model
float height 7mm
pilot screw 2.5 for k model, 2 1/4 for J model
1988 = J model
1989 = K model
Cant help on springs. Maybe pm Yoke who has rebuilt a 400 and is in Ireland. He has done comprehensive you tube videos and may be able to help.

https://www.youtube.com/watch?v=VPSXwIVNGJQ