i need some carb part help...

[MrDude_1]

i need the seals for the float bowls... whats a good source for these?

and i was wondering if you guys knew where i can get just some jets..

i know hordpower sells this "all in one" jetkit/pod/crankcase breather combo.. and i plan to get it evnetually....but i just dont have the cash left.

im hoping you guys know where i can get some jets cheap, and that i can just go up a tad on both jets and be fine for now. i just want to be able to ride it around the block before i go tearing into the next stage of the bike build... lol.

[bradrenea]

For your carb parts try www.ridenow.com or www.servicehonda.com for online parts diagrams and ordering. I have ordered from both places with good luck. As far as the jets go, any motorcycle shop should be able to sell you individual jets for a couple bucks apiece.

[Ross]

Cycle Recycle sells just the bowl gaskets for $5.95 each. #BG2675
Click on fuel system parts, then bowl gaskets, and go about 1/3 of the way down the page.

http://www.crc2onlinecatalog.com/Index_Main_Frame.htm

[Copytech]

Any bike shop will have the jets just take in your old ones so they can match them up.

[isaac]

I agree with the copytech. Get the mains from the local bike shop. I found that Mikuni "small" sized main jets fit our carbs fine, and cost less than half what Keihin jets cost for some reason. By "small" I mean there are two different Mikuni main jet bodies, the "small" and the "big", and there are different jet hole sizes for both of those.

[Hordpower]

I have gaskets in stock and all kinds of main jets.