Announcement

Collapse
No announcement yet.

Eric Y's build - Project Taka 92

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I did a start up vid of me riding off into the sunset.

    https://youtu.be/JsOunMAFKuE

    If you care to stick around towards the end, I come back around. It's a bit slow to not totally piss off the neighbors. This and the CB-1 riding around are constant reminders that I'm the guy with the motorcycles.

    It is a bit hard to start lately. I think the SpeedCell has been abused a bit. I may consider the 8 cell version as it's the only bigger battery that will fit.

    Eric Y.
    1990 Hawk NT663 - 95% finished, 100% fun!.
    https://www.hawkgtforum.com/forum/ho...roject-taka-92

    https://www.flickr.com/photos/eyuzon/albums/72157675070162792


    2001 VFR800i - road trip bike.
    https://www.flickr.com/photos/eyuzon...57666415263457

    1990 CB-1 - budget bike.
    https://www.flickr.com/photos/eyuzon...57710757780347

    Detroit, MI

    Comment


      Awesome looking/sounding Hawk! Looking forward to you getting some real road time on it. Bring that thing south, riding season has finally arrived...
      This forum is entirely dedicated to wasting time and money modifying a slow motorcycle. - joel

      Nothing like a project to keep you busy, slowly draining funds out of the wallet! - spacetiger

      Our Hawks have all the power any mature, sensible rider can use on any street or highway without carrying around excessively unnecessary big-bore weight and power - squirrelman

      Bike builds can be and most time are art and expression. To take something mass produced and impersonal and make something personal that you can't stop staring at as you walk away. There is nothing I find more satisfying than looking at something cool and beautiful and thinking "I made that". - 6

      Comment


        What a stud you are!! Good looking hawk by the way...final product pictures?

        Comment


          Originally Posted by flyinelvis View Post
          Awesome looking/sounding Hawk! Looking forward to you getting some real road time on it. Bring that thing south, riding season has finally arrived...
          Thanks Tom! Time to just ride it! I can finish the last 5% next time. One of these days I should make it down there. Michigan's roads are a bit boring compared to Tenn and the Carolinas. There are some good hidden gems in Ohio I hear.

          Originally Posted by Superdukerider View Post
          What a stud you are!! Good looking hawk by the way...final product pictures?
          Thanks Sean! I do love how it turned out! Final pics due when I get a chance, weather permitting. Now that its running, I can find a proper background instead of in front of my house.
          Eric Y.
          1990 Hawk NT663 - 95% finished, 100% fun!.
          https://www.hawkgtforum.com/forum/ho...roject-taka-92

          https://www.flickr.com/photos/eyuzon/albums/72157675070162792


          2001 VFR800i - road trip bike.
          https://www.flickr.com/photos/eyuzon...57666415263457

          1990 CB-1 - budget bike.
          https://www.flickr.com/photos/eyuzon...57710757780347

          Detroit, MI

          Comment


            Also, started working on the build sheet. It's a lot to summarize and a lot of peeps that helped along the way.
            Eric Y.
            1990 Hawk NT663 - 95% finished, 100% fun!.
            https://www.hawkgtforum.com/forum/ho...roject-taka-92

            https://www.flickr.com/photos/eyuzon/albums/72157675070162792


            2001 VFR800i - road trip bike.
            https://www.flickr.com/photos/eyuzon...57666415263457

            1990 CB-1 - budget bike.
            https://www.flickr.com/photos/eyuzon...57710757780347

            Detroit, MI

            Comment


              Here is the build sheet! BIG THANK YOU TO ALL THAT ADVISED, HELPED, COMMENTED AND CONTRIBUTED! I could not have done this build without your help!

              ==========================================
              # part contributer forum ID Donated?
              1 frame and swingarm Bill @wildwhl
              2 triple clamp lower, CBR600rr, stock bore andspacing
              3 triple clamp upper, Ducati Monster, bored 53mm & wider 204mm spacing Duc forum member
              4 custom offset eccentric top nut, 2.5mm in offset of top and bottom pieces collaborated design w/ Bill @wildwhl
              5 handlebar mounts, Ducati S2R1000, shortened. prev Duc
              6 handlebar, Ducati S2R1000, cut down -1" per side. prev Duc
              7 rear wheel hub, spindle, cush drive. Ducati 748 Duc forum member
              8 custom sleeve and spacer to fit small hub in big swingarm friend at a machine shop
              9 quick change carrier & sprocket, aluminum, aftermarket ebay i
              10 aluminum sprocket spacer made by me on my lathe
              11 rear caliper hanger, overslung, Duc ver, custom Eric @Frinesi2
              12 aluminum threaded anchor made by me on my lathe
              13 forks, DLC, Ducati 848 prev Duc
              14 rear shock, Penske 8983 RM Brian @Garbodp
              15 front calipers & master,Ducati 848 prev Duc
              16 front brake rotors, 320mm, Ducati 848 prev Duc
              17 front axle & nut,Ducati S2R1000 prev Duc
              18 front Ducati HyperMotard wheel, forged aluminum, Marchesini prev Duc
              19 rear Ducati HyperMotard wheel, forged aluminum, Marchesini prev Duc
              20 clutch & brake levers, hybrid CRG levers and generic pivots ebay
              21 rearsets, Nobunaka Racing in Thailand. Off 900rr Nobunaka
              22 front fender, Ducati Performance carbon, 848 model craigslist
              23 HPR thru SA ss brake line kit JD @Hordpower
              24 rear caliper, master and line, Brembo P32 ebay
              25 subframe, custom, prototyped in aluminum Bill @wildwhl
              26 tail, Honda NSF100 WeBike
              27 seatpan, oem Marty @mparker donated
              28 seat pan modded, foam and cover from Aprilia RSV4 me
              29 tank, hawk.Previously owned by BTT Mark @slowpoke2 donated
              30 front tank rubber mount Sean @Superdukerider donated
              31 rear tank mount Bill @wildwhl donated
              32 paint tank and tail Andy @6
              33 paint tank and tail Chuck @69Falcon
              34 paint tank and tail Kristen @DaisyRose951
              35 decals, custom Jas @88HondaHawk donated
              36 carbs with HRC slides eBay
              37 carb intake rubbers, jets, pods, several orders….. JD @Hordpower
              38 engine, 663 bore, 11-1 pistons, MC X8 cams, stage 1 heads JD @Hordpower
              39 carb bolt kit, m4 stainless, allen heads Tom @flyinelvis
              40 exhaust, M4 full, ceramic coated Shaan @RC-DEVIL
              41 custom M4 midpipe and cut down M4 carbon muffler me
              42 exhaust hanger, made from cbr shift linkage and some ball joints me
              43 Thermae aluminum radiator & parts JB
              44 idle speed adjust knob Bill @behindthetimes donated
              45 engine side covers, powdercoated Chris at work
              46 rear coil bracket Sean @Superdukerider donated
              47 wiring harness system, various connector shells, oem terminals Bill @behindthetimes donated
              48 ditto, thru whole oem harness Bill @wildwhl donated
              49 Ignitech CDI JD @Hordpower
              50 battery, SpeedCell, 4 cell JD @Hordpower
              51 electrical harness re-work Anthony at work
              52 headlight, HD V-Rod me
              53 headlight mounts SpeedMotoCo
              54 LED tail light / turns from 600rr from prev 600rr
              55 600F4i dash eBay
              56 custom bracket for 600F4i dash collaborated design w/ Bill @wildwhl
              57 chain roller Eric @Frinesi2
              58 shift rod & heim joints rod supply house online
              59 chain, 520 JD @Hordpower
              60 kickstand Glenn @NervGS
              61 breather Jeremy @JPetak15
              62 Rizoma mirrors ebay
              63 cooling hoses, T-stat housing Chris @Gweenz
              64 chrome cooling pipe Chuck @69Falcon donated
              65 water pump seal, NLA Sean @Superdukerider donated
              # part contributer forum ID Donated?
              1 frame and swingarm Bill wildwhl
              2 triple clamp lower, CBR600rr, stock bore andspacing
              3 triple clamp upper, Ducati Monster, bored 53mm & wider 204mm spacing Duc forum member
              4 custom offset eccentric top nut, 2.5mm in offset of top and bottom pieces collaborated design w/ Bill wildwhl
              5 handlebar mounts, Ducati S2R1000, shortened. prev Duc
              6 handlebar, Ducati S2R1000, cut down -1" per side. prev Duc
              7 rear wheel hub, spindle, cush drive. Ducati 748 Duc forum member
              8 custom sleeve and spacer to fit small hub in big swingarm friend at a machine shop
              9 quick change carrier & sprocket, aluminum, aftermarket ebay
              10 aluminum sprocket spacer made by me on my lathe
              11 rear caliper hanger, overslung, Duc ver, custom Eric frinesi2
              12 aluminum threaded anchor made by me on my lathe
              13 forks, DLC, Ducati 848 prev Duc
              14 rear shock, Penske 8983 RM Brian Garbodp
              15 front calipers & master,Ducati 848 prev Duc
              16 front brake rotors, 320mm, Ducati 848 prev Duc
              17 front axle & nut,Ducati S2R1000 prev Duc
              18 front Ducati HyperMotard wheel, forged aluminum, Marchesini prev Duc
              19 rear Ducati HyperMotard wheel, forged aluminum, Marchesini prev Duc
              20 clutch & brake levers, hybrid CRG levers and generic pivots ebay
              21 rearsets, Nobunaka Racing in Thailand. Off 900rr Nobunaka
              22 front fender, Ducati Performance carbon, 848 model craigslist
              23 HPR thru SA ss brake line kit JD Hordpower
              24 rear caliper, master and line, Brembo P32 ebay
              25 subframe, custom, prototyped in aluminum Bill wildwhl
              26 tail, Honda NSF100 WeBike
              27 seatpan, oem Marty mparker donated
              28 seat pan modded, foam and cover from Aprilia RSV4 me
              29 tank, hawk.Previously owned by BTT Mark slowpoke2 donated
              30 front tank rubber mount Sean Superdukerider donated
              31 rear tank mount Bill wildwhl donated
              32 paint tank and tail Andy 6
              33 paint tank and tail Chuck 69Falcon
              34 paint tank and tail Kristen DaisyRose951
              35 decals, custom Jas @88HondaHawk donated
              36 carbs with HRC slides eBay.
              37 carb intake rubbers, jets, pods, several orders….. JD Hordpower
              38 engine, 663 bore, 11-1 pistons, MC X8 cams, stage 1 heads JD Hordpower
              39 carb bolt kit, m4 stainless, allen heads Tom flyinelvis
              40 exhaust, M4 full, ceramic coated Shaan RC-DEVIL
              41 custom M4 midpipe and cut down M4 carbon muffler me
              42 exhaust hanger, made from cbr shift linkage and some ball joints me
              43 Thermae aluminum radiator & parts JB
              44 idle speed adjust knob Bill behindthetimes donated
              45 engine side covers, powdercoated Chris at work
              46 rear coil bracket Sean Superdukerider donated
              47 wiring harness system, various connector shells, oem terminals Bill behindthetimes donated
              48 ditto, thru whole oem harness Bill wildwhl donated
              49 Ignitech CDI JD Hordpower
              50 battery, SpeedCell, 4 cell JD Hordpower
              51 electrical harness re-work Anthony at work
              52 headlight, HD V-Rod me
              53 headlight mounts SpeedMotoCo
              54 LED tail light / turns from 600rr from prev 600rr
              55 600F4i dash eBay
              56 custom bracket for 600F4i dash collaborated design w/ Bill wildwhl
              57 chain roller Eric frinesi2
              58 shift rod & heim joints rod supply house online
              59 chain, 520 JD Hordpower
              60 kickstand Glenn NervGS
              61 breather Jeremy JPetak15
              62 Rizoma mirrors ebay
              63 cooling hoses, T-stat housing Chris Gweenz
              64 chrome cooling pipe Chuck 69Falcon donated
              65 water pump seal, NLA Sean Superdukerider donated

              If I missed somebody, just yell at me. I'll fix it.
              Last edited by eyhonda; 10-24-2019, 09:09 PM.
              Eric Y.
              1990 Hawk NT663 - 95% finished, 100% fun!.
              https://www.hawkgtforum.com/forum/ho...roject-taka-92

              https://www.flickr.com/photos/eyuzon/albums/72157675070162792


              2001 VFR800i - road trip bike.
              https://www.flickr.com/photos/eyuzon...57666415263457

              1990 CB-1 - budget bike.
              https://www.flickr.com/photos/eyuzon...57710757780347

              Detroit, MI

              Comment


                Great build Eric. #36 was not me. I bought a set of carbs, for parts, that did not
                include slides from you. Maybe that caused some confusion.

                and.....you helped in my build by selling me the F2 front wheel I was hunting.
                I passed the discs that came with it to another member with F2 forks.

                Being helped, and paying it forward, is a great part of this forum.

                Comment


                  Originally Posted by cloud09 View Post
                  Great build Eric. #36 was not me. I bought a set of carbs, for parts, that did not
                  include slides from you. Maybe that caused some confusion.

                  and.....you helped in my build by selling me the F2 front wheel I was hunting.
                  I passed the discs that came with it to another member with F2 forks.

                  Being helped, and paying it forward, is a great part of this forum.
                  Yup, gotcha. Duly noted! I scanned the messages for parts and now I see the mix up. Anyway, thanks! Happy its almost done to the point I can ride it and finish the rest as I get to it. Of course, glad to help you too.
                  Eric Y.
                  1990 Hawk NT663 - 95% finished, 100% fun!.
                  https://www.hawkgtforum.com/forum/ho...roject-taka-92

                  https://www.flickr.com/photos/eyuzon/albums/72157675070162792


                  2001 VFR800i - road trip bike.
                  https://www.flickr.com/photos/eyuzon...57666415263457

                  1990 CB-1 - budget bike.
                  https://www.flickr.com/photos/eyuzon...57710757780347

                  Detroit, MI

                  Comment

                  Working...
                  X