5.2.23 All 4-stroke machines must be equipped with a fluid catch pan of
sufficient size and heat-resistant material to contain the contents of the
crankcases in the event of an engine or crankcase failure. Minimum
capacity of the fluid catch pan is to be 3 quarts.
A. Enlargement and/or modification of an OEM fairing lower is permitted
to attain the necessary fluid retention
B. Machines not equipped with a lower OEM fairing may install a fairing
in order to comply with this rule as long as it meets the minimum
requirements in Section 5.2.11 of the rules.
C. A maximum of two holes, 1" or smaller in diameter, may be drilled in
the fluid catch pan. These holes are to be plugged during dry
conditions, and may be opened only when the event is declared
“wet” by the Referee/Race Director. (Tape is not an acceptable plug
for these wet weather drain holes.)
sufficient size and heat-resistant material to contain the contents of the
crankcases in the event of an engine or crankcase failure. Minimum
capacity of the fluid catch pan is to be 3 quarts.
A. Enlargement and/or modification of an OEM fairing lower is permitted
to attain the necessary fluid retention
B. Machines not equipped with a lower OEM fairing may install a fairing
in order to comply with this rule as long as it meets the minimum
requirements in Section 5.2.11 of the rules.
C. A maximum of two holes, 1" or smaller in diameter, may be drilled in
the fluid catch pan. These holes are to be plugged during dry
conditions, and may be opened only when the event is declared
“wet” by the Referee/Race Director. (Tape is not an acceptable plug
for these wet weather drain holes.)
i was just wondering... do we have to add lower fairings to our bikes? id like to take mine to the track once or twice in her life.. not just trackdays but an actual CCS race...
Comment