eyhonda
Last Activity: 5 Hours Ago
Joined: 10-31-2016
Location: The D, MI
-
I had to change out the race springs in the Hord motor for OEM ones. Too firm for my comfort but that was before know about this option. Nice work,... -
Yeah, right!? I can only check the tire pressures and oil levels so many times! Actually, now I'm busy working on other peoples bikes. I may even...Leave a comment:
-
To be honest, I don't really know. I followed what was done many times. I vaguely think that the 1100 is used on a linkage while the cb-1 (and Hawk)...Leave a comment:
-
I do remember seeing the YSS shock for a CB-1 one in my searches. Maybe, down the road it would be good upgrade. Never heard of the other makers you...Last edited by eyhonda; 6 Days Ago.Leave a comment:
-
Yes, it bolts up. You may need to clear a bit of the lower mount on the swingarm to adjust the rebound (or is it compression) screw, using a Dremel....Leave a comment:
-
Also, started working on the build sheet. It's a lot to summarize and a lot of peeps that helped along the way.Leave a comment:
-
Thanks Tom! Time to just ride it! I can finish the last 5% next time. One of these days I should make it down there. Michigan's roads are a bit boring...Leave a comment:
-
If I did that, I would spend more than the bikes worth!...Leave a comment:
-
Yup, it's a challenging one! No rearsets, no exhaust, no seats, not even an aftermarket air filter! Like it was never made! A ghost bike. It's one...Leave a comment:
-
Here is a vid of my CB-1 starting, idling and revving after I tack welded a Yoshi can on it. Full systems are non-existent, so this is stop-gap for...Leave a comment:
-
I did a start up vid of me riding off into the sunset.
https://youtu.be/JsOunMAFKuE
If you care to stick around towards the...Leave a comment:
-
Birthday wishes to her. I pray for her to get through this tough time and for a fast recovery.Leave a comment:
-
I second Red Wings. Not by FHE but from co-workers in the same industry. I myself use Dr Martens, believe or not. They have a decent steel toe boot. Like...Last edited by eyhonda; 2 Weeks Ago.Leave a comment:
-
Just the screen. PM me your address and I'll send it off. I'll check for a fuel tap later. But if I do, it's for a CB-1. It might fit....Leave a comment:
-
Mine was also stuck and hence a bit distorted with plier marks. But it looks to be still serviceable. This is when a set of forceps come in handy....Leave a comment:
-
I have an extra one if you screw it up.Leave a comment:
-
I think its a pretty good idea! Looks like it would work for a CB-1 too.Leave a comment:
-
Replacing the rubber boots/intakes is well worth it. Can pop off carbs and replace jets in minutes. Popping on is as easy popping off!Last edited by eyhonda; 2 Weeks Ago.Leave a comment:
-
I'm a fan of Rizomas. But I like the ones with the larger mirrors. The tiny ones are difficult to see with and the bigger ones are just as nice looking....Leave a comment:
-
The Dream shop! That is a LOT of space! We are also getting a new building for our small team here in the D, but 20k of space pales. And here I thought...Leave a comment:
No activity results to display
Leave a comment: